Fleck / Pentair Controls & Parts

Seal and spacer kit for the Fleck 5600 and 9000 (upper only). These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals...

The Fleck bottom distributor basket (40922) is a very durable distributor basket that allows exceptional flows, while utilizing smaller slits. The bottom distributor basket works great for water...

Stuffer tool PLUS seal and spacer kit for the Fleck 2510, 2700, 2750, and 2900 (upper piston only). These wear out over time and can cause your control head to work inefficiently, including...

Drain line flow control (DLFC) button 7.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12408

Drain retainer clip for Fleck 2510 control valve. Product Features Drain Clip Replacement clip for drain line on Fleck 2510 control valve   This also is the

Drain line flow control (DLFC) button 5.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12092

Replacement brine tank shut off assembly with float and air check for most common brine tanks. Product Features Complete Float Assembly Includes brine safety valve, float, and

Replacement brine piston for the Fleck 5600, 5600SXT, and 5000 valves. Product Features Fleck 5600 Brine PistonReplacement brine piston for the Fleck 5600 softener valve.

Rebuild kit for the Fleck 5600SXT softener valve. Kit includes piston assembly (Fleck part# 60102-71), seal and spacer kit (Fleck part# 60125), and brine valve piston assembly (Fleck part# 60032)...

  Product Features Bypass Seal Replacement seal for stainless steel bypass valve used with Fleck 5600, 2510, 900, 9100, and more Fleck Part# 14105 This i

Replacement Motor - 24V, 60Hz motor with 1/30 RPM.Motor is used in the Fleck 5600 with 24v power supply, and all valves using the 3200/3210 timer assembly, including Fleck 2500, 2510, 2750, 9000,...

Genuine Fleck part #10229 Replacement gasket for injector cap Replacement injector cap gasket for the Fleck 2510 and 2510SXT valves.

The puller tool makes replacing the seals & spacers in the Fleck 2510, 2700, 2750, and 2900 heads much easier and saves you time. The puller tool isn't necessary, but it is highly recommended for...

Service and rebuild kit for Fleck 2510 AIO (Air Injection) Piston, seals, and spacers - 61670-00 (61662-01) Inlet check valve coupler - 19228-02 Air draw check valve - 62116 Stuffer tool -...

Fleck 2310 brine tank safety shut off valve with 3/8" brine line and pick-up tube connections. Does not include the float assembly. Fleck part# 60014. Product Features 2310 Safety