Fleck / Pentair Controls & Parts

Replacement Injector Body Fleck part #13163 Body ONLY, no other parts included Replacement injector body for Fleck 1600 injector assembly, commonly used on the 1500, 2500, 2510, and 3600 series valves. Does NOT include injectors, flow controls, or...

This is a replacement valve for a dual tank softener. The 9100 mechanical twin tank valve connects two water softener tanks for automatically alternating between tanks as needed. The valve is constructed of a very durable fiber-reinforced polymer (see...

2510 mechanical control head for water softeners Product Features Fleck 2510 Mechanical control built on the #1 control valve in the US. Features dual drive motors for a stronger, longer lasting control valve. For Water Softeners Metered control with...

Lower seal and spacer kit for the Fleck 9000 & 9100 valve. These wear out over time and can cause your control head to leak, work inefficiently, or not work at all. This is the entire lower seal & spacer kit needed to replace your old ones...

Split ring used on many clack valves and bypass valves. Part CV 3150

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and resins.

13303 - O-ring, Injector Cover

The 1600 Brine Valve Short Stem is commonly used in the Fleck 1500 and 2500 models. The piston assembly (part#60029) should be replaced if the brine refill never stops (valve is stuck).The 1600 (or 3/8" tubing size) valve is normally used on...

Fleck Seal O-Ring

Brine line flow control (BLFC) button 0.25 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12094

Standard flow meter cable for the 3/4-inch paddlewheel meter assembly 60086-50 (sold separately) used on a variety of Fleck valves including the 2510SXT and 5600SXT. Discontinued by manufacturer- limited availability  Product Features Meter Cable...

Drain line flow control (DLFC) button 3.5 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12090

Genuine Fleck Part #60425-12 Complete Tube Assembly for 9-12 inch tanks Tube assembly for Fleck 9100 valves on 9-12 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

Cover for Fleck 5600 Valve with "L"-style bracket Offers additional protection for the head This cover for the Fleck 5600 Valve with "L"-style bracket slides down over the valve to offer additional protection from the elements. This cover is...

O-ring used with the Brine Valve Piston Assembly. There are Two used in the Valve Assembly. One on the Brine Valve and One in the Hole that the Brine Valve sits inside.* NOTE: This o-ring, 13302, is also used on the "drain port" between the...