Fleck / Pentair Controls & Parts

Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all mechanical/Econominder Fleck 2510, 5600, 9000, and 9100 softener valves. Complete Includes flow...

Hot water seal and spacer kit for the Fleck 5600 & 4650 valves. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals...

Replacement Injector Body Fleck part #13163 Body ONLY, no other parts included Replacement injector body for Fleck 1600 injector assembly, commonly used on the 1500, 2500, 2510, and 3600...

Main gear & shaft for downflow digital Fleck valves - 5600SE, 5600SXT 6600, 6700 Genuine Fleck part #42933 This is the main gear and shaft that moves the piston and brine cam. If the motor is...

Piston Rod Retainer for Fleck 9000, 9100, 9500, 2500, and 2510 Control Valves Product Features Piston Rod Retainer Connects piston rod to main piston

Replacement piston assembly for the Fleck 5600 & 6700 valves. These wear out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60121-71...

Replacement motor for the Fleck 5600SXT & SE control head (Fleck part# 16944). This is also used on the Fleck 6600/6700 valves. This is the 24V, 60Hz motor with 2 RPM. Product Features

Drain line flow control (DLFC) button 4 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12091

Discontinued by manufacturer, limited availability. Part will be available in the following kit(s) FL62103-02 Cam, Drive 2500, 2510,2700, 2750, 2850, 2900, 2900s Drive Cam -STF BLUE version part #...

**Please contact us about availability.    Special Piston ( NHWBP ) version for 1500, 2500, 2510 and 2750 when multiple tanks ( alternating ) installation = PN 60101-01Used when No Water is allowed...

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and...

This is a replacement valve for a dual tank softener. The 9100 mechanical twin tank valve connects two water softener tanks for automatically alternating between tanks as needed. The valve is...

Lower seal and spacer kit for the Fleck 9000 & 9100 valve. These wear out over time and can cause your control head to leak, work inefficiently, or not work at all. This is the entire lower seal &...

Standard flow meter cable for the 3/4-inch paddlewheel meter assembly 60086-50 (sold separately) used on a variety of Fleck valves including the 2510SXT and 5600SXT. Discontinued by manufacturer-...

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with...