Fleck / Pentair Controls & Parts

The Top Distributor Basket is a bayonet-style twist-on basket for Fleck 7000 control valve that fits the larger 32mm distributor tube. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product Features...

Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5000, 5600, and 9000 valves. Includes O-ring (part #12977). BLFC Button ( 0.25, 0.50 or 1.0 gpm ) and BLFC Retainer sold separately.

Service and rebuild kit for Fleck 2510 AIO (Air Injection) Piston, seals, and spacers - 61670-00 (61662-01) Inlet check valve coupler - 19228-02 Air draw check valve - 62116 Fixes most common problems on Air Injection control heads Fleck 2510...

Replacement Brine Piston Fits Fleck 7000, 5810, & 5812 Valves Fleck Part #60016-01 This a replacement brine piston for the Fleck 7000, 5810, and 5812 series control valves. Possible solution for problems such as:-Water continually filling the brine...

Drain line flow control (DLFC) button 2.4 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12088

For AIR INJECTION Valves Prepaid shipping label to send in your control head Visual inspection and troubleshooting Replacement of commonly worn out parts Final testing to ensure proper operation Shipped back to your door Purchase professional...

Used on softeners up to 13-inch diameter Twelve day timer based regeneration Fits standard 2.5-inch – 8 NPSM tank threads Continuous flow - 20 GPM Peak flow - 26 GPM Max backwash flow - 7 GPM Bypass/yoke SOLD SEPARATELY Replacement control...

Rebuild kit for the Fleck 5600 softener valve. Kit includes piston assembly (Fleck part# 60102-00), seal and spacer kit (Fleck part# 60125), and brine valve piston assembly (Fleck part# 60032). For the Fleck 5600 filter valve rebuild kit, see...

Replacement brine injector drain assembly for the Fleck 5600 and 5600SXT valves. Product Features Replacement Brine/Drain Assembly Contains all parts to replace the entire assembly 12638 - O-ring, Drain 13301 - O-ring, Injector 13302 - O-ring,...

Clamp ring assembly for Fleck 2510 control valve (Fleck part# 60503). Includes both clamp arms (Fleck parts# 19899 & 19900), hinge pin (Fleck part# 40000), pivot (Fleck part# 19998), and the screw & comb hardware (Fleck part# 40057). Product Features...

Rebuild kit for the Fleck 5600SXT filter valve. Kit includes piston assembly (Fleck part# 60102-71) and seal and spacer kit (Fleck part# 60125). For the Fleck 5600SXT digital softener valve rebuild kit, see FP-56SXT-RBKS. Product Features Fleck...

Paddlewheel flow meter assembly for digital SE/SXT Fleck 2510, 5600, 9000, and 9100 softener valves. Includes screws, clips, O-rings and flow straightener. Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all digital...

2510SXT digital control head for water softeners Product Features Fleck 2510SXT Digital control built on the #1 control valve in the US. Features dual drive motors for a stronger, longer lasting control valve. For Water Softeners Metered...

Five o-rings used on the Fleck 5600 Injector Body Drain Module.13303, 13302, 12638, and two of 13301

DISCONTINUED BY MANUFACTURER   Valve body for Fleck 2510. Fleck part 19328. **NOTE: Does not include any o-rings or seals. These are sold separately.