Replacement Parts, Resin, & Media

O-ring for Fleck 2510 control valve that seats against the tank to create water-tight seal (Fleck part# 18303). The slip ring (Fleck part# 19197) holds the o-ring in place that seats against the mineral tank. Product Features Tank...

Replace damaged connections or use on replacement Fleck valves. Fits all Fleck 2510, 5600, & 9000 valves. Product Features Plastic Yoke Fits all Fleck 2510, 5600, & 9000 valves 1" Connection 1-inch male NPT...

One Cubic Foot Turbidex™ Replacement MediaSediment and turbidity reduction media Traps sediment as small as 5-micron 1 cubic foot Turbidex media Service flow - 12 GPM per sq ft surface area Peak flow - 20 GPM per sq ft surface area Backwash flow...

Filter housing wrench to fit standard 2.5" filter housings. Product Features Filter Housing Wrench Fits housings for standard 2.5" filters common on reverse osmosis and water filter systems. Wrench measures approximately 4 3/16" on the inside...

Auto shut-off valve with 1/4" quick-connect fittings for reverse osmosis systems Product Features Auto Shut-off Valve Use to replace defective valves or upgrading an existing system (other parts may be necessary for upgrading) 1/4" Quick Connect...

Bobber for H474 Float Assembly Replacement bobber for the H474 float assembly. Simple clip in mechanism for easy installation.

Garden hose adapter to connect 1/4" tubing to 3/4" faucet Product Features 3/4" Thread 3/4" threaded end fits standard garden hose, outdoor, washing machine faucets. 1/4" Quick Connect 1/4" quick connect allows easy connection to 1/4" poly tubing...

Used on reverse systems to prevent backflow into the membrane element. When this part malfunctions, it can allow the tank to empty back through the membrane and down the drain line. Product Features Stainless Steel The check valve components are made...

The 5800 pump can draw water from a holding tank and pressurize it, or boost the pressure from a low pressure source. They are designed to operate intermittently, but can run continuously for several hour intervals. The pumps can be operated in demand...

Inline flow restrictor for reverse osmosis systems Product Features Flow Restrictor Flow restrictor to be used on waste water line of RO systems. This is designed for use with a 50 GPD membrane 1/4" Quick Connect Connects to tubing used on most filter...

The stuffer tool makes replacing the seals & spacers in the Fleck 2510, 2700, 2750, and 2900 heads much easier and saves you time. The stuffer tool isn't necessary, but it is highly recommended. This tool can be rented for $20, plus shipping...

1/4-inch quick connect union allow splicing lines to add an additional distance to your water filtration system. Union allows easy connection to standard 1/4-inch tubing. Product Features Union Fitting Splice two lines together to form a longer line ...

1/2 cubic foot of greensand media for iron, hydrogen sulfide, and manganese Product Features 0.5 cubic foot Greensand For removal of iron, hydrogen sulfide (sulfur), and manganese Removes up to 15 ppm iron Causes red/orange staining with levels as low...

The 32mm Fleck bottom distributor basket (40924) is a very durable distributor basket that allows exceptional flows, while utilizing smaller slits. The bottom distributor basket works great for water softeners, iron filters, carbon filters, sediment...

Fine mesh softening resin to be used as a replacement or upgrade for current softening resin. Fine mesh resin will remove medium levels of iron from water while softening it at the same time. Product Features 1 cubic footFine Mesh Resin For treatment...