Replacement Parts, Resin, & Media

The stuffer tool makes replacing the seals & spacers in the Fleck 2510, 2700, 2750, and 2900 heads much easier and saves you time. The stuffer tool isn't necessary, but it is highly recommended. This tool can be rented for $20, plus shipping...

1/4-inch quick connect union allow splicing lines to add an additional distance to your water filtration system. Union allows easy connection to standard 1/4-inch tubing. Product Features Union Fitting Splice two lines together to form a longer line ...

Inline flow restrictor for reverse osmosis systems Product Features Flow Restrictor Flow restrictor to be used on waste water line of RO systems. This is designed for use with a 50 GPD membrane 1/4" Quick Connect Connects to tubing used on most filter...

With the regular stress of removal and tightening, filter housings and fittings will weaken over time. To prevent unwanted system failure, the filter housings on your systems need to be replaced EVERY 5 YEARS. This kit includes three 10" white filter...

Auto shut-off valve with 1/4" quick-connect fittings for reverse osmosis systems Product Features Auto Shut-off Valve Use to replace defective valves or upgrading an existing system (other parts may be necessary for upgrading) 1/4" Quick Connect...

Riser Tube 1.050" x 54" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media.

Used on reverse systems to prevent backflow into the membrane element. When this part malfunctions, it can allow the tank to empty back through the membrane and down the drain line. Product Features Stainless Steel The check valve components are made...

Replacement motor for the Fleck 5600 control head (Fleck part# 18743-1). This is also used on the Fleck 3200/3210 timer assembly (used on Fleck valves 2500, 2510, 2750, 9000, 9100, & 9500). This is the 120V, 60Hz motor with 1/30 RPM. This replaces...

Filter housing wrench to fit standard 2.5" filter housings. Product Features Filter Housing Wrench Fits housings for standard 2.5" filters common on reverse osmosis and water filter systems. Wrench measures approximately 4 3/16" on the inside...

O-ring for Fleck 2510 control valve that seats against the tank to create water-tight seal (Fleck part# 18303). The slip ring (Fleck part# 19197) holds the o-ring in place that seats against the mineral tank. Product Features Tank...

One Cubic Foot Turbidex™ Replacement MediaSediment and turbidity reduction media Traps sediment as small as 5-micron 1 cubic foot Turbidex media Service flow - 12 GPM per sq ft surface area Peak flow - 20 GPM per sq ft surface area Backwash flow...

Replace damaged connections or use on replacement Fleck valves. Fits all Fleck 2510, 5600, & 9000 valves. Product Features Plastic Yoke Fits all Fleck 2510, 5600, & 9000 valves 1" Connection 1-inch male NPT...

Stuffer tool PLUS seal and spacer kit for the Fleck 2510, 2700, 2750, and 2900 (upper piston only). These wear out over time and can cause your control head to work inefficiently, including constant water down the drain line, poor backwash, incomplete...

Replacement brine fitting kit for Fleck 5600 and 5600SXT valves. Product Features Replacement Brine Fitting kitInclude brass nut, ferrule, insert, and screen Genuine Fleck PartThis contains genuine Fleck parts 60900-38 Product Description Replacement...

O-ring for Fleck 2510 control valve that seals against the distributor tube (Fleck part# 13304). Product Features Distributor O-ring O-ring for Fleck 2510 & 5600 distributor tube pilot. The o-ring measures 1.05" (Fleck part# 13304) Product...