Replacement Parts, Resin, & Media

1/2 cubic foot of standard resin for water softeners Product Features 0.5 cubic foot High Capacity Resin For treatment of hard water Product Description Standard softener resin used in most water softening systems. Amount of resin needed can be...

Replacement Injector Body Fleck part #13163 Body ONLY, no other part included Replacement injector body for Fleck 5600 series valves. Does NOT inculde injectors, flow controls, or other components. If the injector body is the only damaged part you can...

Round Brine Tank Includes 4" Brine Well, Safety Float, and Air Check Standard Almond Color Holds approximately 375 lb of salt Measures 18" in diameter, 33" tall Round brine tank used with Fleck control valves. Approximately 18"x18"x33" and holds...

Birm for iron and manganese Product Features 1.0 cubic foot Birm For removal of iron and manganese from water supplies Removes up to 8 ppm iron Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water or dissolved)...

Service and rebuild kit for Fleck 2510 AIO (Air Injection) Piston, seals, and spacers - 61670-00 (61662-01) Inlet check valve coupler - 19228-02 Air draw check valve - 62116 Stuffer tool - 11098 Fixes most common problems on Air Injection control...

Transformer Fleck Electronic 24 volt 19674 ( newer PN 44147 ) for Fleck 24v Timer Motors as well as Models SXT and SE.24 volt 60 hz 400 ma. with wiring.    This is the transformer provided by Fleck with their electronic valves.

1 cubic foot of 10% crosslink resin for water softeners Product Features 1 cubic foot High Capacity 10% Crosslink Resin Durable resin for treatment of hard water Product Description 10% crosslink softening resin for use in most water softening...

Fleck 2310 brine tank safety shut off valve with 3/8" brine line and pick-up tube connections. Does not include the float assembly. Fleck part# 60014. Product Features 2310 Safety Brine Valve Fleck 2310 safety brine tank valve prevents overfilling of...

Spin-Down filter with 1" connections for sand and sediment separation. Product Features 1-inch 1-inch slip connections for easy installation 1-25 GPM Will treat flow rates between 1 and 25 gallons per minute Drain Port Drain port...

The 1/4-inch nylon hex nipple has male NPT connections on both ends and is made of durable nylon that works with PVC, CPVC, PEX, copper, brass, and any other place 1/4-inch plumbing is used. These are commonly used between filter housings on drinking...

Standard 150 GPD reverse osmosis membrane will fit all standard reverse osmosis systems, but produce water 2-3 times faster than the typical membrane used in most RO systems. If upgrading from a membrane with a different daily production rate, you must...

The single canister big blue bracket is a heavy duty steel bracket that is powder coated white for a durable, long lasting product. The bracket is designed to be used with both the 10" and 20" big blue housings and features slots to allow for the...

Replacement filter housing for standard 10" filters Product Features White Housing Blocks UV rays 1/4" Threaded In/Out Standard size accommodates a wide variety of fittings Mounting Holes Allows for easy connection to standard mounting...

Replacement O-ring for standard sized (2.5x10) filter housings to replace cracked or torn o-rings that would allow water to leak

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...