Replacement Parts, Resin, & Media

Advantages - Efficient regeneration - Good kinetic performance - Low extractables Country of Origin: United States Item Dimensions: 18.0"L x 14.0"W x 8.0"H   Purolite C100E is a premium, industrial grade gel polystyrenic strong acid cation...

1/4-inch threaded elbow fitting screws into filter housings and any other 1/4-inch female NPTopenings, including inline filters. Elbow fittings allow for tighter connections while quick connect enables quick and easy connection to standard 1/4-inch...

1/2 cubic foot of corosex for aggressive acid neutralization Product Features 0.5 cubic foot Corosex-Flomag Aggressively neutralizes acid, correcting pH as low as 4.5. Labeled as Corosex or Flomag Neutralizes pH 4.5-6 Corrects pH problems as low 4.5...

Genuine Fleck part #14805 Replacement gasket for injector body Replacement injector body gasket for the Fleck 2510 and 2510SXT valves.

1/8-inch threaded elbow fitting screws into membrane housings and any other 1/8-inch female NPT holes. Elbow fitting allows for tighter connections while quick connect enable quick and easy connection to standard 1/4" tubing. Product Features Elbow...

Half Cubic Foot Turbidex™ Replacement MediaSediment and turbidity reduction media Traps sediment as small as 5-micron 1/2 cubic foot Turbidex media Service flow - 12 GPM per sq ft surface area Peak flow - 20 GPM per sq ft surface area Backwash...

35 Gallon Tank - Chemical tank used with chemical injection systems, including soda ash, chlorine, and hydrogen peroxide. Rugged polyethylene construction allows for indoor and outdoor applications. Tank measures 18 inch in diameter by 32 inches tall...

Brine line flow control (BLFC) button 0.5 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12095

1/2 cubic foot of KL media for iron, hydrogen sulfide, and manganese Product Features 1 cubic foot KL Katalox Light Media For removal of iron and manganese Removes up to 10 ppm iron Causes red/orange staining with levels as low as 0.3 ppm...

1/4-inch stem elbow fitting pushes into any 1/4-inch female quick connect fitting, which are common on filter housings, membrane housings, auto shutoff valves, booster pumps, permeate pumps, inline filters, and more. Elbow fittings allow for tighter...

Faucet quick connect coupler allows you to connect 1/4-inch tubing (common size on reverse osmosis and drinking water filters) to drinking water faucets without having to use any compression fittings. Product Features Product Description More...

Overflow Fitting With Nut attaches to the side of the brine tank. This fitting allows you to attach a drain hose (1/2" ID) to a floor drain to divert the water should the salt tank start to over fill.

Replacement LayneRT arsenic removal media Product Features 1.0 cu. ft. LayneRT Arsenic Removal Media LayneRT media for the removal of arsenic from water supplies. 3.75-7.50 GPM Flow Rate Media is rated for 3.75 GPM continual service flow and 7...

The drain saddle valve is affixed to a drain line on a sink, or similar plumbing, to allow the waste water from reverse osmosis systems to drain. It will fit on pipes up to 1.5-inch in diameter and has a 3/8-inch quick-connect fitting to connect to...

Fleck Part #60015-00 Replacement downflow piston assembly Fits Fleck 5000/Proflo downflow valves Replacement piston assembly for Fleck the 5000/Proflo downflow valves. The downflow valve is the most common.