Replacement Parts, Resin, & Media

Clamp ring assembly for Fleck 2510 control valve (Fleck part# 60503). Includes both clamp arms (Fleck parts# 19899 & 19900), hinge pin (Fleck part# 40000), pivot (Fleck part# 19998), and the screw & comb hardware (Fleck part# 40057). Product Features...

2510SXT digital control head for water softeners Product Features Fleck 2510SXT Digital control built on the #1 control valve in the US. Features dual drive motors for a stronger, longer lasting control valve. For Water Softeners Metered...

Transform your water system with the Fine Mesh Iron Pro Water Softener Refill Kit. This 1.5 cu ft (48k) kit is designed to effectively rejuvenate your water softening system, ensuring you experience the highest quality water for your household needs...

Rebuild kit for the Fleck 5600SXT filter valve. Kit includes piston assembly (Fleck part# 60102-71) and seal and spacer kit (Fleck part# 60125). For the Fleck 5600SXT digital softener valve rebuild kit, see FP-56SXT-RBKS. Product Features Fleck...

DISCONTINUED BY MANUFACTURER   Valve body for Fleck 2510. Fleck part 19328. **NOTE: Does not include any o-rings or seals. These are sold separately.

Universal salt grid for 11" square brine tanks

Paddlewheel flow meter assembly for digital SE/SXT Fleck 2510, 5600, 9000, and 9100 softener valves. Includes screws, clips, O-rings and flow straightener. Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all digital...

The Aquatec ERP-1000 Permeate Pump is a non-electrical, energy-saving device which dramatically improves RO system efficiency. It utilizes a turbine pump that uses the pressure of the waste water to pump the product drinking water into the storage tank...

Fine mesh softening resin to be used as a replacement or upgrade for current softening resin. Fine mesh resin will remove medium levels of iron from water while softening it at the same time. Product Features 0.5 cubic footFine Mesh Resin For...

This 14.0 gallon stainless steel pressurized RO storage tank has a 10.3 gallon draw and allows for a greater amount of water for immediate use than the standard 4.0 gallon tank. The tank meaures 23" tall by 15" in diameter. Product...

Part #44144 For 2510, 2750, 2850, 2900, 3150, and 3900 valves with 24v motor Input: 120V 50/50Hz 15W 1.66 Amps Replacement transformer for valves with 24V motor.

The drain saddle valve is affixed to a drain line on a sink, or similar plumbing, to allow the waste water from reverse osmosis systems to drain. It will fit on pipes up to 1.5-inch in diameter and has a 3/8-inch quick-connect fitting to connect to...

Rebuild kit for the Fleck 2510 softener valve. Kit includes piston assembly and seal & spacer kit, and brin valve (Fleck part# 61670-00 and 60011). For the Fleck 2510 filter valve rebuild kit, see FP-61670-00. Product Features Fleck 2510...

Five o-rings used on the Fleck 5600 Injector Body Drain Module.13303, 13302, 12638, and two of 13301

C-Series 1" PVC M Adap Ells (2) 1" PVC MIPT Elbow Adapters Set of 2 for "C-Series" Control Valves