Replacement Parts, Resin, & Media

The quick connect fitting tool works with both 1/4" AND 3/8" fittings. It slides over the collet ring on quick connect fittings (John Guest, Mur-Lock, DM, Speedfit, etc.) and allows you to easily remove tubing. The fitting tool is especially helpful in...

The 3/4-inch nylon hex nipple has male NPT connections on both ends and is made of durable nylon that works with PVC, CPVC, PEX, copper, brass, and any other place 3/4-inch plumbing is used. Product Features 3/4-inch Male NPT 3/4-inch male...

Fine mesh softening resin to be used as a replacement or upgrade for current softening resin. Fine mesh resin will remove medium levels of iron from water while softening it at the same time. Product Features 0.5 cubic footFine Mesh Resin For...

Replacement media, gravel, and funnel For Titanium Series 1.5 cu ft Includes 1.5 cu ft Katalox Media Replacement media kits make it easy to replace the media in your tank. Includes the specified amount of media, required gravel, as well as a funnel...

Drain line flow control (DLFC) button 2.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12087

High quality, NSF certified replacement 75 GPD TFC Hydron membrane (TW-1812-75D). This membrane can be used to replace CSM, Axeon, Dow FilmTec, GE, and any other 1812 style membranes. The Hydron membranes by Hydronix Water Technology are a cost...

Rebuild kit for the Fleck 5600 filter valve. Kit includes piston assembly (Fleck part# 60102-10) and seal and spacer kit (Fleck part# 60125). For the Fleck 5600 softener valve rebuild kit, see FP-5600RBKS. Product Features Fleck 5600 Rebuild...

Five o-rings used on the Fleck 5600 Injector Body Drain Module.13303, 13302, 12638, and two of 13301

Drain line flow control (DLFC) button 3.0 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12089

Flow meter assembly for Fleck 2510 & 5600 softener valves with screws, clips, and o-rings. Product Features Flow Meter Replaces cracked or worn-out flow meters on all Fleck 2510 & 5600 softener valves. Complete Includes flow meter, screws,...

Complete booster pump kit to upgrade standard reverse osmosis systems Product Features Complete Kit CDP 6800 Pump110v TransformerESO SwitchTSO SwithY-harnessTubingInstructions Booster Pump Increases pressure to your system for better production and...

Replacement square front panel assembly includes circuit board for Fleck 5600SXT. Fleck part #61672-0201. Product Features Includes Circuit Board Front panel assembly include circuit board for replacement on 5600SXT heads. Square Style Replacement...

12-inch x 52-inch mineral and resin tank for use with backwashing filters, upflow filters, and water softeners. Commonly used on 2.0 cubic feet filtering systems and 80K water softeners. Includes base and available in 3 different colors; riser tube and...

Brine Fitting (B.L.F.C. ) assembly for Fleck 1650 brine system (common on Fleck 2510, 2750, and 2850 valves). Housing (17907), BLFC Button ( 0.25 gpm - 12818, 0.50 gpm - 12095 OR 1.0 gpm - 12097) and BLFC Retainer (12098) included.   Discontinued by...

Seal and spacer kit for the Fleck 5000 and Proflo. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes 5 Seals, 4 regular Spacers, and 1 special End Spacer (the end spacer goes in first, flat side...