Replacement Parts, Resin, & Media

Replacement membrane housing for standard sized reverse osmosis membranes. Includes two 1/8-inch male thread by 1/4-inch female quick-connect elbows AND a 1/8-inch male thread by 1/4-inch female quick-connect check valve elbow. Product Features ...

Rebuild kit for the Fleck 5600 softener valve. Kit includes piston assembly (Fleck part# 60102-00), seal and spacer kit (Fleck part# 60125), and brine valve piston assembly (Fleck part# 60032). For the Fleck 5600 filter valve rebuild kit, see...

13-inch x 54-inch mineral and resin tank for use with backwashing filters, upflow filters, and water softeners. Commonly used on 2.0 cubic feet air injection systems, 3.0 cubic feet filtering systems and 96K water softeners. Includes base and available...

2.5" mounting clip Fits standard membrane housings Fits larger 2.5" inline filters Single 2.5" mounting clip has single mounting hole approximately 3/16". Fits standard membrane housings and 2.5" inline filters.

1/4-inch stem elbow fitting pushes into any 1/4-inch female quick connect fitting, which are common on filter housings, membrane housings, auto shutoff valves, booster pumps, permeate pumps, inline filters, and more. Elbow fittings allow for tighter...

Kit to connect your drinking water system to a refrigerator ice maker/water dispenser Product Features 25 ft tubing 1/4" LLDPE tubing for connecting from filter system to refrigerator Tee Fitting 1/4" 3-way tee fitting for splitting the product line...

PotPerm Feeder for Greensand Systems 5 Gallon Tank with Float Standard tank used with most Greensand systems Includes float and felt pad Measures 10.5-inches x 16.25t-inches Tank style may vary Standard tank used to hold potassium permanganate (KMNO4...

Soda ash is great for very acidic water with very low pH levels and won't increase water hardness. Typically used with an injection pump. Product Features Soda Ash Soda ash is a sodium carbonate powder that dissolves easily in water and aggressively...

Set of 2 medium replacement clips for connecting a 2" inline filter to a standard membrane housing or connecting a 2" and 2.5" inline filter together.

1/4-inch threaded elbow fitting screws into filter housings and any other 1/4-inch female NPTopenings, including inline filters. Elbow fittings allow for tighter connections while quick connect enables quick and easy connection to standard 1/4-inch...

Replacement brine injector drain assembly for the Fleck 5600 and 5600SXT valves. Product Features Replacement Brine/Drain Assembly Contains all parts to replace the entire assembly 12638 - O-ring, Drain 13301 - O-ring, Injector 13302 - O-ring,...

Half Cubic Foot Turbidex™ Replacement MediaSediment and turbidity reduction media Traps sediment as small as 5-micron 1/2 cubic foot Turbidex media Service flow - 12 GPM per sq ft surface area Peak flow - 20 GPM per sq ft surface area Backwash...

Clamp ring assembly for Fleck 2510 control valve (Fleck part# 60503). Includes both clamp arms (Fleck parts# 19899 & 19900), hinge pin (Fleck part# 40000), pivot (Fleck part# 19998), and the screw & comb hardware (Fleck part# 40057). Product Features...

Universal salt grid for 11" square brine tanks

Fitting for 1190 and 1191 upflow valves PVC Solvent - 3/4-inch female, 1-inch male Fits common 1190 and 1191 upflow valves used on the GreenFlo and other upflow systems. Dual fitting is both 3/4-inch and 1-inch size.