Replacement Parts, Resin, & Media

CanPro 4-cartridge system with KDF85 and Fleck 2510/5600 adapter

Brushed Stainless Steel FinishAir GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/8 inch mounting hole Air Gap Include extra 2 barbs required for air gap installs. If air gap is...

The 1/4-inch nylon hex nipple has male NPT connections on both ends and is made of durable nylon that works with PVC, CPVC, PEX, copper, brass, and any other place 1/4-inch plumbing is used. These are commonly used between filter housings on drinking...

Oil Rubbed Bronze FinishNon Air GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/16-1/2 inch mounting hole Non Air Gap Single line connection for non air gap installation. Does NOT...

Nuclear grade mixed bed DI resin for removal of 99.9% of all contaminants Product Features DI Resin For removal of 99.9% of all contaminants from water 1 lb. of Resin Great for refilling of cartridges. It takes about 1 lb. to fill a standard 2.5" x...

Replacement resin and funnel High capacity resin Includes 1.5 cu ft resin Replacement resin kits make it easy to replace the resin in your tank. Includes the specified amount of resin as well as a funnel to make loading easier! Gravel is not required...

Product Features Paddlewheel Flow Meter Replaces cracked or worn-out flow meters on all mechanical/Econominder Fleck 2510, 5600, 9000, and 9100 softener valves. Complete Includes flow meter, screws, clips, O-rings and flow straightener. (Does...

Replacement Injector Body Fleck part #13163 Body ONLY, no other parts included Replacement injector body for Fleck 1600 injector assembly, commonly used on the 1500, 2500, 2510, and 3600 series valves. Does NOT include injectors, flow controls, or...

Seal and spacer kit for the Fleck 5000 and Proflo. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes 5 Seals, 4 regular Spacers, and 1 special End Spacer (the end spacer goes in first, flat side...

Hot water seal and spacer kit for the Fleck 5600 & 4650 valves. These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals needed to replace your old ones. Fleck part#...

Replacement piston assembly for the Fleck 5600 & 6700 valves. These wear out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60121-71. Product Features Fleck 5600 & 6700 Digital...

The 3/4-inch PVC ball valve has female NPT connections on both ends and is a heavy duty, durable ball valve that works great for connecting whole house water filters, bypass loops, and where ever else 3/4-inch plumbing is used. Product...

2.5" mounting clip Fits standard membrane housings Fits larger 2.5" inline filters Single 2.5" mounting clip has single mounting hole approximately 3/16". Fits standard membrane housings and 2.5" inline filters.

Universal brine tank salt grid for 18" tanks. Will fit 18"x40", 18"x33". Has 4" opening for brine well.

Digital control head for air injection systems Product Features Fleck 5600SXT Digital control built on the #1 control valve in the US For Air Injection Systems Patented piston design injects air into the system to maximize contaminant removal Timed...