Replacement Parts, Resin, & Media

Elevate your water purification with the AdEdge Bayoxide E33 Arsenic Media, specifically engineered for the effective removal of arsenic contaminants from your water supply. With 2.7 cubic feet of...

Mounting clip for Aquatec permeate pumps. Fits both ERP 500 and ERP 1000.

The Aquatec PSW-240 tank shutoff (TSO) switch for the Aquatec booster pumps used in RO systems with a tank. This switch connects to your water line on your RO system and shuts off the pump when the...

Cover for Fleck 5600 Valve with "L"-style bracket Offers additional protection for the head This cover for the Fleck 5600 Valve with "L"-style bracket slides down over the valve to offer...

1/8-inch threaded elbow fitting screws into membrane housings and any other 1/8-inch female NPT holes. Elbow fitting allows for tighter connections while quick connect enable quick and easy...

Replacement membrane housing for standard sized reverse osmosis membranes. Fits standard membranes that measure approximately 1.75-inch in diameter and 11.75-inch in total length, which are usually...

12-inch x 48-inch mineral and resin tank for use with backwashing filters, upflow filters, and water softeners. Commonly used on 1.75 cubic feet filtering systems and 64K water softeners. Includes...

KDF 55 filter for replacing exhausted media or adding to an existing system. Product Features KDF 55 KDF 55 is a high-purity copper-zinc granule media 1 Pail Price is

Transform your water quality with the Fine Mesh Iron Pro Water Softener Refill Kit. This top-of-the-line refill kit is designed to enhance the efficiency of your water softening system, ensuring that...

Timer Cover for Standard Fleck 5600 Control Valve # 13753-02 ( new PN 6022501 )

The Axeon HF1-2540 low energy RO membrane elements can be used with many commercial RO systems, measure 2.5" x 40", and are rated for 1000 GPD @ 150 psi. Made in the USA and have a 1-year warranty...

This is an electronic shutoff switch kit for the Aquatec booster pumps and includes the ESO and the wiring harness. This switch connects to your incoming water line on your RO system and shuts off...

This kit includes 10ft of 1/2" ID clear drain line (5/8" OD), stainless steel hose clamp, and a roll of teflon tape. The stainless steel hose clamp is used to secure the drain line on the barbed...

V3193-02 repair wrench can be used with all Clack Water Softeners and Filters Systems It can help remove and tighten pistons, and help install and loosen nuts and fittings on Clack valves

1600 Injector Assembly Fleck - 60080-01 for the Fleck valves using 3/8" brine tubing. Includes # 1 (white) Injector Nozzle & Throat, screen (10227), 2 gaskets (10229, 11475), brass elbow (10328), 2...