Replacement Parts, Resin, & Media

Chrome FinishNon Air GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/16-1/2 inch mounting hole Non Air Gap Single line connection for non air gap installation. Does NOT include...

16-inch x 65-inch mineral and resin tank for use with backwashing filters, upflow filters and water softeners. The tank has a 4-inch opening and requires the adapter bushing (see -inchOptions-inch tab above) to accept standard control heads. Includes...

Neoprene water softener resin tank jacket ideal for minimizing the common issue with tank sweating when ground water is cold and ambient air is warm and humid. Can also be used on Filter Tanks of the corresponding size. Order the correct size by...

C3005 Clack WS1 Cage Spacer Stack Assembly. If the clack cage has one seal damaged, it will cause the water to continously leak out the drain Genuine part- part number V3005-02 C3005 Clack ws1 Cage Spacer Stack Assembly. With the clack cage if one of...

Replacement circuit board for your WS1 valve Clack V3108 Replacement Circuit Board Interchangeable with older version Clack V3108 Circuit board replacement. Easy replacement, just simply remove harness from old board, and plug in replacement for set up...

Fleck water softener air check (does not include bobber part 60068-30 or safety valve part 60014) This is the piece on the float assembly in the brine tank (grey long tube with air check on bottom) 3/8" X 34" (may receive 48" depending on stock, can be...

Replacement media, gravel, and funnel For Titanium Series 2 cu ft Includes 2 cu ft Katalox Media Replacement media kits make it easy to replace the media in your tank. Includes the specified amount of media, required gravel, as well as a funnel to...

Stainless 18" Corrugated Flexible Connector 1" FIPT x 1" Quick Connect   Features: Mega-Flow Super water-flex  304 series stainless steel  Push-to-connect john guest fitting  Installs onto pipe of...

NO RETURNS   The PULLER tool , part 12682, used to make it easier to REMOVE the Seals and Spacers of the Lower section of the Fleck 2900 Valve and 3150 Valve.

Fleck 2" Brass Drain Line Flow Control Less/Buttons (100 Gallons Per Minute Max)   Fleck 2 Brass DLFC 4 Button, No Buttons   **LIMITED AVAILABILITY**

Round Brine Tank Includes 4" Brine Well, Safety Float, and Air Check Standard Black Color Holds approximately 450 lb of salt Measures 18" in diameter, 40" tall Round brine tank used with Fleck control valves. Approximately 18"x18"x33" and holds...

Rectangular Brine Tank Includes 4" Brine Well, Safety Float, and Air Check Standard Blue Color Holds approximately 275 lb of salt Measures 15"x17" wide, 36" tall Rectangular brine tank used with Fleck control valves. Approximately 15"x17"x36"...

Round Brine Tank Includes 4" Brine Well and Safety Float Standard Blue Color Holds approximately 375 lb of salt Measures 18" in diameter, 33" tall Round brine tank used with Autotrol control valves. Approximately 18"x18"x33" and holds roughly...

Center plug for Fleck bypass valves. Fleck part #11972

Replacement piston assembly for the Fleck 5600 mechanical softener valve. The piston wears out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck part# 60121-00. Product Features Fleck 5600...