Replacement Parts, Resin, & Media

Round Brine Tank Includes 4" Brine Well and Safety Float Standard Almond Color Holds approximately 450 lb of salt Measures 18" in diameter, 40" tall Round brine tank used with Autotrol...

Ball Valve - Ball valve allows you to turn water off or on with your water filtration system or other devices using 3/8-inch poly tubing. Ball valve is a standard quarter-turn design. 1/4-inch...

The 20" slimline filter housing accommodates 2.5" wide whole house filters. This housing has a pressure relief button on the cap. It is made of a durable, reinforced polypropylene that is compatible...

The Axeon HF1-4021 low energy RO membrane elements can be used with many commercial RO systems, measure 4" x 21", and are rated for 1000 GPD @ 150 psi. Made in the USA and have a 1-year warranty. ...

Replacement piston for the Fleck 9000 & 9100 softener valves (lower only). These wear out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck...

Faucet quick connect coupler allows you to connect 3/8-inch tubing to standard reverse osmosis and drinking water faucets without having to use any compression fittings. Product Features

Black FinishNon Air GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/16-1/2 inch mounting hole

Fits Pentek CLEAR Big Blue 4.5-inch filter housings Approximate Dimensions: OD:5-11/16 inches ID:5 1/2 inches Thickness: 1/8 inch Part Number 151362 or Round BB BUNA-N Replacement O-ring for...

15V DC Adapter V3186-06 fits Clack valves manufactured in 2017 or newer Is not compatible to systems that were manufactured before 2017 as those system were manufactured with an AC output. You will...

Fleck Brine Valve Assembly 9000

*Partially* Preloaded 14-inch x 65-inch tank for easy replacement (cannot ship completely loaded due to weight/size) Purolite High Capacity resin from a well known resin manufacturer Standard 2...

WS1 FITTING 1" SHARK BITE ASSY. (LEAD FREE)   Fitting ( solds as set of two each ) is made to connect to the Valve or By Pass Valve for Clack WS1 Valve and other "brands" that use the Clack type of...

Main gear & shaft for the Fleck 5600 control head (Fleck part# 13170). This is typically the only gear that may break or wear out. Product Features Idler Gear  

Fitting for 1190 and 1191 upflow valves Brass Sweat - 1-inch Set of 2 fittings Fits common 1190 and 1191 upflow valves used on the GreenFlo and other upflow systems. Made of lead-free brass.

Discontinued by manufacturer   Replaces Drive Motor Replace Fleck Part #18737 and 61633-00 24v, 50/60 Hz, 1 RPM This motor moves the piston during regeneration and is a common cause of a system...