Replacement Parts, Resin, & Media

Fleck (40538) 32 mm O-Ring Distributor Retainer

Round Brine Tank Includes 4" Brine Well, Safety Float, and Air Check Standard Blue Color Holds approximately 450 lb of salt Measures 18" in diameter, 40" tall Round brine tank used with Fleck control valves. Approximately 18"x18"x33" and holds...

Replacement motor for the Fleck 5600SXT & SE control head (Fleck part# 16944). This is also used on the Fleck 6600/6700 valves. This is the 24V, 60Hz motor with 2 RPM. Product Features Replacement Motor Drive motor is used in the Fleck...

1 cubic foot of activated alumina media Product Features 1 cubic foot activated aluminaReduces or removes fluoride, arsenic, and lead. Product Description Please note that many activated alumina filters are blended with bone char carbon to improve...

The Axeon HF1-2540 low energy RO membrane elements can be used with many commercial RO systems, measure 2.5" x 40", and are rated for 1000 GPD @ 150 psi. Made in the USA and have a 1-year warranty. Product Features Replacement Membrane Axeon HF1-4040...

The 1-inch PVC ball valve has female NPT connections on both ends and is a heavy duty, durable ball valve that works great for connecting whole house water filters, bypass loops, and where ever else 1-inch plumbing is used. Product...

21-inch x 62-inch mineral and resin tank for use with backwashing filters, upflow filters and water softeners. The tank has a 4-inch opening and requires the adapter bushing (see -inchOptions-inch tab above) to accept standard control heads. Includes...

ResinTech media for tannin removal Product Features 1.0 cubic foot ResinTech Tannin Media For removal of tannins from water supplies 2.0-4.0 GPM/cubic feet Service Flow Media is rated for 2.0-4.0 GPM service flow per cubic foot of tank volume .25-1.0...

Fits Pentek CLEAR Big Blue 4.5-inch filter housings Approximate Dimensions: OD:5-11/16 inches ID:5 1/2 inches Thickness: 1/8 inch Part Number 151362 or Round BB BUNA-N Replacement O-ring for Pentek Clear** sumps. Pentek recommends replacing O-rings...

Upper Basket - Upper basket installs on the bottom of many Fleck, Clack, and Autotrol control valves to help prevent media getting pushed into plumbing due to pressure bursts and incorrect plumbing Fine Mesh - Smaller slits allow for use with fine mesh...

Adapter Assembly for 2nd Tank on 9100 valve. Part number 14865. This is the part that screws onto the 2nd Tank used with 9100 valve.   **The Distributor Adapter (61419), is sold separately.

Noryl® 4" Tank Opening In/Out Head with 1.5" O-ring Distributor Opening and 1-1/2" Threaded Female Inlet and Outlet For use with large tanks that have 4" opening 1.5" female inlet/outlet connections 1.5" O-ring distributor opening  In/Out Tank...

Clack WS1 White Injector Assembly for 10" DownFlow or 13" UpFlow Tank Diameter.  Clack WS1 and 1.25 Injector Assembly with o rings.Refer to the chart below if you are not sure, noting that most valves are set up as "Down Flow," but some are made to...

60125-15 Chloramine Resistant Top Seals And Spacers Kit for Fleck 5600, 9000, and 9100 Valves.*NOT for Hot Water (that is PN 60125-05)The material of the seals has three times the Chloramine resistance of the previous silicone material used.The new seals...

1 cubic foot of bone char carbon media Product Features 0.5 cubic foot Bone Char Carbon Reduces or removes fluoride, arsenic, radioactive isotopes, iron, lead, mercury, aluminum, silver, bromine, manganese, and more. Plus, it removes chemicals, tastes...