Replacement Parts, Resin, & Media

Timer Cover for Standard Fleck 5600 Control Valve # 13753-02 ( new PN 6022501 )

The Axeon HF1-2540 low energy RO membrane elements can be used with many commercial RO systems, measure 2.5" x 40", and are rated for 1000 GPD @ 150 psi. Made in the USA and have a 1-year warranty...

This is an electronic shutoff switch kit for the Aquatec booster pumps and includes the ESO and the wiring harness. This switch connects to your incoming water line on your RO system and shuts off...

1600 Injector Assembly Fleck - 60080-01 for the Fleck valves using 3/8" brine tubing. Includes # 1 (white) Injector Nozzle & Throat, screen (10227), 2 gaskets (10229, 11475), brass elbow (10328), 2...

Enhance the performance of your Platinum Series tank with the Air Injection Platinum 20 Refill Kit - AIP20. This refill kit provides everything you need to maintain optimal water quality and enhance...

Advantages - Efficient regeneration - Good kinetic performance - Low extractables Country of Origin: United States   Puro

SOFTENER Valve with 12-Day Timer Fiber-reinforced polymer valve body Maximum backwash of 17 GPM Service flow rate up to 19 GPM (15 psi drop) Peak flow rate up to 24 GPM (25 psi drop) Cv flow rate up...

Replacement piston for the Fleck 9000 & 9100 softener valves (UPPER only). These wear out over time and can cause your control head to work inefficiently, bind, or not work at all. Genuine Fleck...

The 5/16-inch x 1.5-inch lag bolts are used to mount the Big Blue brackets to the Big Blue housing. There are 4 lag bolts and 4 flat washers in a package. Product Features Lag Bol

This kit includes 10ft of 1/2" ID clear drain line (5/8" OD), stainless steel hose clamp, and a roll of teflon tape. The stainless steel hose clamp is used to secure the drain line on the barbed...

V3193-02 repair wrench can be used with all Clack Water Softeners and Filters Systems It can help remove and tighten pistons, and help install and loosen nuts and fittings on Clack valves

Fleck water softener air check (does not include bobber part 60068-30 or safety valve part 60014) This is the piece on the float assembly in the brine tank (grey long tube with air check on bottom)

C-Series John Guest Elbow Adapter. 3/4" John Guest Elbow Adapters, set of 2 for "C Series" Control Valves. Will connect to CPVC, Copper and PEX tubing.     ITEM SPECIFICATIONS Material PVC

0.5 cubic foot KL Katalox Light Media  For removal of iron and manganese Removes up to 10 ppm iron  Causes red/orange staining with levels as low as 0.3 ppm. Treats both ferrous (clear water...

Filter-Ag Plus media for advanced removal and finer filtration of sediment and turbidity Product Features 0.5 cubic foot Filter-Ag Plus For advanced removal and finer filtration of