Replacement Parts, Resin, & Media

The Aquatec PSW-240 tank shutoff (TSO) switch for the Aquatec booster pumps used in RO systems with a tank. This switch connects to your water line on your RO system and shuts off the pump when the tank pressure exceeds 40 PSI or the ESO (if applicable)...

The Axeon HF1-2540 low energy RO membrane elements can be used with many commercial RO systems, measure 2.5" x 40", and are rated for 1000 GPD @ 150 psi. Made in the USA and have a 1-year warranty. Product Features Replacement Membrane Axeon...

1/8-inch threaded elbow fitting screws into membrane housings and any other 1/8-inch female NPT holes. Elbow fitting allows for tighter connections while quick connect enable quick and easy connection to standard 1/4" tubing. Includes 5 elbows. Product...

Replacement membrane housing for standard sized reverse osmosis membranes. Fits standard membranes that measure approximately 1.75-inch in diameter and 11.75-inch in total length, which are usually denoted by -inch1812-inch in the model or part number...

12-inch x 48-inch mineral and resin tank for use with backwashing filters, upflow filters, and water softeners. Commonly used on 1.75 cubic feet filtering systems and 64K water softeners. Includes base and available in 3 different colors; riser tube and...

Special Piston ( NHWBP ) version for 1500, 2500, 2510 and 2750 when multiple tanks ( alternating ) installation = PN 60101-01Used when No Water is allowed to pass the valve during the backwash / regeneration process.The NHWBP ( no hard water by pass )...

O-ring used with the Brine Valve Piston Assembly. There are Two used in the Valve Assembly. One on the Brine Valve and One in the Hole that the Brine Valve sits inside.* NOTE: This o-ring, 13302, is also used on the "drain port" between the...

Drain line flow control (DLFC) button 3.5 gallons per minute (gpm). Used to regulate drain flow on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12090

Standard Square Brine Tank Includes 4" Brine Well snf Safety Float Standard Black Color Holds approximately 275 lb of salt Measures 15"x17"x36" Standard square brine tank used with Autotrol control valves. Approximately 15"x15"x36" and holds...

Bypass for Simple In/Out Valve DOES NOT include connection fittings Bypass valve for simple in/out valve used on basic filters.

Replacement AdEdge Bayoxide E33 arsenic removal media 1.0 cubic foot Product Features 2.75 cubic feet of AdEdge Bayoxide E33 Arsenic Removal Media For removal of Arsenic +3 and +5 from water supplies. 8.0 GPM for 2.75 cu. ft. Media is rated for 8.0...

Timer Cover for Standard Fleck 5600 Control Valve # 13753-02 ( new PN 6022501 )

Brass Drain Fitting for Fleck 2510 control valve. Product Features Brass Drain FittingHeavy duty replacement drain fitting on Fleck 2510 control valve, includes O-ringFitting Only (No flow control)This is the fitting only and does not include the...

Genuine Fleck Part #60425-16 Complete Tube Assembly for 13-16 inch tanks Tube assembly for Fleck 9100 valves on 13-16 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

The shut off switch kit includes the electronic shut off (ESO) switch, the tank shut off (TSO) switch, and the wiring harness for Aquatec booster pumps. This kit, when added to your stand-alone booster pump, will automatically shut off the water supply...