Replacement Parts, Resin, & Media

Digital control head for air injection systems Product Features Fleck 5600SXT Digital control built on the #1 control valve in the US For Air Injection Systems Patented piston design injects air into the system to maximize contaminant removal Timed...

Replacement media, gravel, and funnel For Titanium Series 1 cu ft Includes 1 cu ft Katalox Media Replacement media kits make it easy to replace the media in your tank. Includes the specified amount of media, required gravel, as well as a...

Replacement resin and funnel Fine mesh resin Includes 1.5 cu ft resin Replacement resin kits make it easy to replace the resin in your tank. Includes the specified amount of resin, required gravel, as well as a funnel to make loading easier! PLEASE...

10-inch x 54-inch mineral and resin tank with dome loading port commonly used for 1.5 cubic foot pH filters Product Features 10-inch x 54-inch10-inch x 54-inch tank is commonly used on 1.0 cubic foot air injection systems, 1.5 cubic feet filtering...

Lower seal and spacer kit for the Fleck 9000 & 9100 valve. These wear out over time and can cause your control head to leak, work inefficiently, or not work at all. This is the entire lower seal & spacer kit needed to replace your old ones...

Round Brine Tank Includes 4" Brine Well and Safety Float Standard Almond Color Holds approximately 375 lb of salt Measures 18" in diameter, 33" tall Round brine tank used with Autotrol control valves. Approximately 18"x18"x33" and holds roughly...

Brushed Nickel FinishAir GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/8 inch mounting hole Air Gap Include extra 2 barbs required for air gap installs. If air gap is not...

Five o-rings used on the Fleck 5600 Injector Body Drain Module.13303, 13302, 12638, and two of 13301

C-Series 1" PVC M Adapter (2) 1" PVC MIPT Straight Adapters Set of 2 for "C-Series" Control Valves     ITEM SPECIFICATIONS Material PVC Size 1" Type Connector Valve Model C-Series Valve Model WS1.25 Valve Model NWTS,...

Product Features Aquatec ERP 500 Quieter permeate pump makes less noise for systems rated at 50 GPD or less Reduces Waste Reduces back pressure from the tank, maximizing system efficiency and water purity Non-electric Hydraulically powered,...

Fits Pentek big blue housings that hold 4.5" filters Inner diameter ~7 inches Outer diameter ~7.75 inches Replacement filter housing wrench used to help remove filter housings when changing filters on Pentek big blue filter systems.

Genuine Fleck Part #60425-12 Complete Tube Assembly for 9-12 inch tanks Tube assembly for Fleck 9100 valves on 9-12 inch diameter tanks. Complete assembly includes the tubes, yoke connectors, o-rings, retainers, clips, and screws required to...

Replacement AdEdge Bayoxide E33 arsenic removal media 1.0 cubic foot Product Features 2.0 cubic feet of AdEdge Bayoxide E33 Arsenic Removal Media For removal of Arsenic +3 and +5 from water supplies. 6.0 GPM for 2.0 cu. ft. Media is rated for 6.0 GPM...

The Aquatec PSW-240 tank shutoff (TSO) switch for the Aquatec booster pumps used in RO systems with a tank. This switch connects to your water line on your RO system and shuts off the pump when the tank pressure exceeds 40 PSI or the ESO (if applicable)...

The Axeon HF1-2540 low energy RO membrane elements can be used with many commercial RO systems, measure 2.5" x 40", and are rated for 1000 GPD @ 150 psi. Made in the USA and have a 1-year warranty. Product Features Replacement Membrane Axeon...