Replacement Parts, Resin, & Media

The under-sink connection kit includes the slip joint adapter, a 1/4-inch ball valve, and a 1/4-inch quick-connect drain saddle valve. The kit can be used to connect reverse osmosis systems underneath the sink. Product Features Slip Joint Adapter The...

CL3180, Clack O-ring, Min Tank, 1" & 1-1/4" Vlv, V3180

2.5" mounting clip Fits standard membrane housings Fits larger 2.5" inline filters Single 2.5" mounting clip has single mounting hole approximately 3/16". Fits standard membrane housings and 2.5" inline filters.

13303 - O-ring, Injector Cover

Round Brine Tank Includes 4" Brine Well, Safety Float, and Air Check Standard Almond Color Holds approximately 450 lb of salt Measures 18" in diameter, 40" tall Round brine tank used with Fleck control valves. Approximately 18"x18"x33" and holds...

Standard Square Brine Tank Includes 4" Brine Well and Safety Float Standard Almond Color Holds approximately 275 lb of salt Measures 15"x17"x36" Standard square brine tank used with Autotrol control valves. Approximately 15"x15"x36" and holds...

The Aquatec 550 (5501-IVN2-V77DUL) variable speed booster pump provides constant pressure and integrates a state-of-the-art digital controller which maintains constant pressure (within 2 PSI) for variable flow rates throughout their operating ranges. A...

This is an electronic shutoff switch for the Aquatec booster pumps used in RO systems with a tank. This switch connects to your incoming water line on your RO system and shuts off water to your system when your pump shuts off. This prevents unnecessary...

Riser Tube 1.050" x 65" with Stacked Distributor Basket. These are recommended for systems with Filox media and any other heavy, dense media. This however can be used with any other filter media and resins.

Kit contains 3 Clack part #'s for the Clack WS1 Control Valve Contains Downflow Piston V3011 Contains Brine Regenerant Piston V3174 Contains Spacer Stack V3005 This kit replaces the main interior parts of the Clack WS1 water softener/filter control...

The 1600 Brine Valve Short Stem is commonly used in the Fleck 1500 and 2500 models. The piston assembly (part#60029) should be replaced if the brine refill never stops (valve is stuck).The 1600 (or 3/8" tubing size) valve is normally used on...

The wiring"Y" harness is required to connect the ESO to the Aquatec booster pump and the transformer. Product Features Wiring "Y" Harness The wiring "Y" harness is required to connect the ESO to the Aquatec booster pump and the transformer. Aquatec...

Brushed Nickel FinishAir GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/8 inch mounting hole Air Gap Include extra 2 barbs required for air gap installs. If air gap is not...

6-inch x 35-inch mineral and resin tank for use with backwashing filters, upflow filters, and water softeners. Commonly used on 0.5 cubic foot filtering systems, and 16K water softeners. Includes base and available in 2 different colors; riser tube and...

Fleck Seal O-Ring