Replacement Parts, Resin, & Media

This is an electronic shutoff switch kit for the Aquatec booster pumps and includes the ESO and the wiring harness. This switch connects to your incoming water line on your RO system and shuts off water to your system when your pump shuts off. This...

120v Transformer for Aquatec CDP 8800 Product Features Transformer Only Aquatec 120v transformer for replacement or custom building 120v Transformer Uses standard 2-prong plug to provide power to CDP 8800 pump For CDP 8800 Powers CDP 8800 Pump OEM...

16-inch x 65-inch mineral and resin tank for use with backwashing filters, upflow filters and water softeners. The tank has a 4-inch opening and requires the adapter bushing (see -inchOptions-inch tab above) to accept standard control heads. Includes...

1600 Injector Assembly Fleck - 60080-01 for the Fleck valves using 3/8" brine tubing. Includes # 1 (white) Injector Nozzle & Throat, screen (10227), 2 gaskets (10229, 11475), brass elbow (10328), 2 screws and top cap. # 1, White, used on 8" to 10"...

Fleck Brine Line Flow Control 3/8" .25 Gallons Per Minute used on 7000, 5810, and 5812 valves

1.5 gpm Drain Line Flow Control ( DLFC ) Button is commonly used with softener valves installed on 8" diameter resin tanks.

Simple In/Out Valve Fill Port Fits Standard 2.5" NPSM tank opening 1.050" distributor opening Includes wrench DOES NOT include bypass or connection fittings Simple in/out valve used for basic filters. Can be used as upflow or downflow...

Inline flow restrictor for reverse osmosis systems Product Features Flow Restrictor Flow restrictor to be used on waste water line of RO systems. This is designed for use with a 75 GPD membrane 1/4" Quick Connect Connects to tubing used on most filter...

Achieve crystal clear water free from harmful arsenic contaminants with the ASM-10-HP Arsenic Media from ResinTech. This reliable removal media is designed to effectively tackle As+5 and oxidized As+3, ensuring your water supply is safe for consumption...

Designed for RO systems with membranes over 50 GPD (gallons per day), the Aquatec CDP 8800 increases pressure on the membrane, reducing waste and improving rejection rates. Product Features Pump Only CDP 8800 Pump for replacement or custom building ...

Replacement o-ring for standard sized membrane housing on drinking water RO systems. *Housing not included*   **Some housings have two o rings. 

Fleck water softener air check (does not include bobber part 60068-30 or safety valve part 60014) This is the piece on the float assembly in the brine tank (grey long tube with air check on bottom) 3/8" X 34" (may receive 48" depending on stock, can be...

Fitting ( solds as set of two each ) is made to connect to the Valve or By Pass Valve for Clack WS1 Valve and other "brands" that use the Clack type of valve under their private label.SharkBite Assembly connects to 3/4" Copper Pipe, PEX, or CPVC pipe...

**Discontinued**   Flat Cap - metal for 1600 or 1700 housing PN 11893  Can also replace PN 10228

Nitrate Selective Resin One-Half Cubic Foot Maximum 19,800 ppm nitrate/nitrate capacity This media provides removal of nitrate in most applications. Amount of media needed for a stand-alone system can be determined by tank size. 8"x44" Tank - 0...