Replacement Parts, Resin, & Media

Flow Meter Cable - Replaces cables that are no longer sending signals from the meter to the controller on all the SE/SXT models of Fleck 2510, 5600, and 7000 valves. For turbine meters - Used with the narrower turbine style meters (part number 60626)...

2510SXT digital control head for filter systems Product Features Fleck 2510SXT Digital control built on the #1 control valve in the US. Also features dual motors for a longer lasting control valve. For Filter Systems Timer control with filter...

Spin-Down filter with 1" connections for sand and sediment separation. Product Features 1-inch 1-inch slip connections for easy installation 1-25 GPM Will treat flow rates between 1 and 25 gallons per minute Drain Port Drain port...

Standard 150 GPD reverse osmosis membrane will fit all standard reverse osmosis systems, but produce water 2-3 times faster than the typical membrane used in most RO systems. If upgrading from a membrane with a different daily production rate, you must...

Replacement media, gravel, and funnel For Gold Series 1 cu ft Includes 1 cu ft Catalytic Carbon Replacement media kits make it easy to replace the media in your tank. Includes the specified amount of media, required gravel, as well as a funnel to...

Replacement slotted brine well 4-inch Diameter No cap included Multiple heights available DOES NOT Include float assembly Standard 4-inch brine well used with most brine tanks. DOES NOT include float assembly.

Replacement O-ring for standard sized (2.5x10) filter housings to replace cracked or torn o-rings that would allow water to leak

Overflow Fitting With Nut attaches to the side of the brine tank. This fitting allows you to attach a drain hose (1/2" ID) to a floor drain to divert the water should the salt tank start to over fill.

The Top Distributor Basket is a bayonet-style twist-on basket for Fleck 7000 control valve that fits the larger 32mm distributor tube. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product Features...

2310 Brine Valve Assembly - Includes Fleck 2310 Brine Valve, Float, and Fleck 500 Air Check. 2310 Brine Ready to connect to 3/8" Poly Brine Line. For use in 28" Brine Wells for 11" x 38", 15" x 17" x 36" and 18" x 33" Brine Tanks. **If you need to...

Replacement resin and funnel Fine mesh resin Includes 2 cu ft resin Replacement resin kits make it easy to replace the resin in your tank. Includes the specified amount of resin, required gravel, as well as a funnel to make loading easier!...

Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5000, 5600, and 9000 valves. Includes O-ring (part #12977). BLFC Button ( 0.25, 0.50 or 1.0 gpm ) and BLFC Retainer sold separately.

Drain line flow control (DLFC) retainer on Fleck 5600, 9000, and 9100 series control valves. Holds drain line flow control button in place. O-ring included.

Brine line flow control (BLFC) button 0.5 gallons per minute (gpm). Used to regulate brine fill speed on Fleck 5600, 9000, and 9100 series control valves. Fleck part #12095

Replacement Brine Piston Fits Fleck 7000, 5810, & 5812 Valves Fleck Part #60016-01 This a replacement brine piston for the Fleck 7000, 5810, and 5812 series control valves. Possible solution for problems such as:-Water continually filling the brine...