Replacement Parts, Resin, & Media

O-ring for Fleck 2510 control valve that seals against the distributor tube (Fleck part# 13304). Product Features Distributor O-ring O-ring for Fleck 2510 & 5600 distributor tube pilot. The o-ring measures 1.05" (Fleck part# 13304) Product...

Replacement motor for the Fleck 5600 control head (Fleck part# 18743-1). This is also used on the Fleck 3200/3210 timer assembly (used on Fleck valves 2500, 2510, 2750, 9000, 9100, & 9500). This is the 120V, 60Hz motor with 1/30 RPM. This replaces...

1/2 cubic foot of greensand media for iron, hydrogen sulfide, and manganese Product Features 0.5 cubic foot Greensand For removal of iron, hydrogen sulfide (sulfur), and manganese Removes up to 15 ppm iron Causes red/orange staining with levels as low...

The 32mm Fleck bottom distributor basket (40924) is a very durable distributor basket that allows exceptional flows, while utilizing smaller slits. The bottom distributor basket works great for water softeners, iron filters, carbon filters, sediment...

A unique system with 2 built in mixing chambers and 2 swirl chambers that reduces a drop of water to hundreds of micro bubbles, allowing the chemical to mix and react 5 times faster than a standard retention tank. Product Features Advanced...

Upper Basket - Upper basket installs on the bottom of many Fleck, Clack, and Autotrol control valves to help prevent media getting pushed into plumbing due to pressure bursts and incorrect plumbing Fine Mesh - Smaller slits allow for use with fine mesh...

High quality, NSF certified replacement 50 GPD TFC Hydron membrane (TW-1812-50D). This membrane can be used to replace CSM, Axeon, Dow FilmTec, GE, and any other 1812 style membranes. The Hydron membranes by Hydronix Water Technology are a cost...

Replacement resin and funnel Purolite C100E High capacity resin Includes 1.5 cu ft resin Replacement resin kits make it easy to replace the resin in your tank. Includes the specified amount of resin as well as a funnel to make loading easier!...

The 1-inch corrugated stainless steel flex line has 1" female NPT connections on both ends and is a heavy duty, durable line the is great for connecting water softeners, backwashing filters, upflow filters, whole house water filters, and where ever...

Mechanical control head for water softeners Product Features Fleck 5600 #1 Control Head in the US For Water Softeners Metered control with brine draw for water softeners Metered Measures water use and regenerates on demand Mechanical Simple, gear...

1 liter of scale prevention water conditioning media for Salt-free Scale Sentry systems. Not recommended for use with iron in the waterDo not use with KDF prefilters Product Features Scale Prevention Salt-free water conditioning media for Scale Sentry...

15 gallon chemical tank used for soda ash, chlorine, and hydrogen peroxide injection. Product Features 15 Gallon Tank Chemical tank used with chemical injection systems, including soda ash, chlorine, and hydrogen peroxide. Rugged polyethylene...

Seal and spacer kit for the Fleck 5600 and 9000 (upper only). These wear out over time and can cause your control head to work inefficiently or not at all. Kit includes all 4 spacers and 5 seals needed to replace your old ones. Fleck part# 60125. ...

Stuffer tool PLUS seal and spacer kit for the Fleck 2510, 2700, 2750, and 2900 (upper piston only). These wear out over time and can cause your control head to work inefficiently, including constant water down the drain line, poor backwash, incomplete...

Fleck 60049 Bypass Valve Fits all Fleck 2510, 5600, & 9000 valves Genuine Fleck Part Replace your worn out bypass valve or upgrade to the convenience of an integrated bypass valve with this new Fleck 60049 plastic bypass valve. Valve fits all Fleck...