Replacement Parts, Resin, & Media

1 cubic foot of high activity granular activated carbon Product Features 1 cubic foot High Activity Carbon Carbon removes a wide range of contaminants from water. Some of those contaminants include organic chemicals (TCE, PFAs), pesticides and...

The Top Distributor Basket is a twist on style for Fleck, Clack, and Autotrol valves that fits a standard riser tube of 1.05" diameter. This top distributor basket is designed to prevent any of the media from exiting your mineral tank. Product...

1/4-inch female threads allow installation of a ball valve on RO storage tanks and other 1/4-inch male fittings to turn water off or on with your water filtration system or other devices using 1/4-inch tubing. Ball valve is a standard quarter-turn...

Fleck Part #61956-01 Replacement piston, seal, and spacer kit Fits Fleck 5810SXT and 5810XTR2 downflow softeners Replacement piston, seal, and spacer kit for Fleck 5810 series downflow softener valves. The downflow softener valve is the most common...

The drain saddle valve is affixed to a drain line on a sink, or similar plumbing, to allow the waste water from reverse osmosis systems to drain. It will fit on pipes up to 1.5-inch in diameter and has a 1/4-inch quick-connect fitting to connect to...

Rebuild kit for the Fleck 2510 filter valve. Kit includes piston assembly and the seal & spacer kit (Fleck part# 61670-00). For the Fleck 2510 softener valve rebuild kit, see FP-2510RBKS. Product Features Fleck 2510 Filter Rebuild Kit Rebuild kit...

The riser tube with standard mesh basket measures 1.05" in diameter and is 54" long. It can be cut shorter to whatever length you need and works with most control valves (please check the diameter of your riser tube before purchasing to ensure that it...

The tank funnel makes filling your resin and mineral tanks much quicker, easier, and cleaner. This funnel can also be used to refill most 2.5-inch diameter and 4.5-inch diameter cartridges. The 10-inch opening narrows down to 2.5-inch and is constructed...

Replacement adapter coupling for 2510, 5600, 9000, and 9100 valves. Product Features Complete Coupling Includes coupler, O-rings, clip, and screw to replace cracked or worn-out couplers Product Description Single replacement adapter...

This 4.0 gallon stainless steel pressurized RO storage tank has a 3.2 gallon draw and is the common size used with most reverse osmosis systems. The tank can be used in an upright or horizontal position and meaures 15" tall by 11" in diameter. Product...

Stuffer tool PLUS seal and spacer kit for the Fleck 2510, 2700, 2750, and 2900 (upper piston only). These wear out over time and can cause your control head to work inefficiently, including constant water down the drain line, poor backwash, incomplete...

Replacement coupler with built-in check valve used on Air Injection systems with 5600SXT or 2510SXT Product Features Check Valve Coupler Replaces cracked or worn-out check valve couplers used on Air Injection systems with 5600SE/SXT or...

10-inch x 54-inch mineral and resin tank for use with backwashing filters, upflow filters, water softeners, and salt-free water conditioners. Commonly used for 1.0 cubic foot air injection systems, 1.5 cubic feet filtering systems, 48K water softeners,...

1/2 cubic foot of calcite media for acid neutralization Product Features 0.5 cubic foot Calcite Neutralizes acid, raising low pH Neutralizes pH 6.0+ Corrects pH problems as low 6.0 alone, can be mixed with Corosex for lower pH levels Naturally...

1/2 cubic foot of greensand media for iron, hydrogen sulfide, and manganese Product Features 0.5 cubic foot Greensand For removal of iron, hydrogen sulfide (sulfur), and manganese Removes up to 15 ppm iron Causes red/orange staining with levels as low...