Chrome FinishAir GapQuarter-Turn HandleCeramic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/8 inch mounting hole Air Gap Include extra 2 barbs required for air gap installs. If air gap is not needed, please...

Main gear & shaft for the Fleck 5600 control head (Fleck part# 13170). This is typically the only gear that may break or wear out. Product Features Main Gear & ShaftMain gear and shaft that moves other gears and moves piston up and down. Replacement...

O-ring for Fleck 5600 & 9000 control valve that fits on the bottom of the control head and seats against the tank to create water-tight seal (Fleck part# 12281). Product Features Tank O-ring O-ring for Fleck 5600 & 9000 control valve...

Injector screen for Fleck 2510, 5600, 3600, 1600, 1500, 9000, and 9100 control heads (Fleck part# 10227). Stainless steel screen is found in the injector housing and can typically be cleaned and reused. Product Features Injector ScreenInjector screen is...

The Mikro Psi portable 4-stage RO/DI system for distilled reef aquarium water for tight spaces. System includes inline sediment filter, inline GAC filter, 75 GPD membrane, and inline DI filter built on a mountable bracket. This system can be taken...

Replacement membrane housing for standard sized reverse osmosis membranes. Fits standard membranes that measure approximately 1.75-inch in diameter and 11.75-inch in total length, which are usually denoted by -inch1812-inch in the model or part number...

Replacement membrane housing for standard sized reverse osmosis membranes. Includes two 1/8-inch male thread by 1/4-inch female quick-connect elbows AND a 1/8-inch male thread by 1/4-inch female quick-connect check valve elbow. Product Features ...

Drain retainer clip for Fleck 2510 control valve. Product Features Drain ClipReplacement clip for drain line on Fleck 2510 control valve Product Description Drain retainer clip for Fleck 2510 control valve. More Info

Adapter base for Fleck 2510 control head (Fleck part# 19322). The adapter base threads are 2.5-inch and fit standard mineral tanks. This is the adapter base only and doesn't include the base seal, clamp, slip ring, or any o-rings (see "Related Products"...

O-ring for Fleck 2510 control valve that seats against the tank to create water-tight seal (Fleck part# 18303). The slip ring (Fleck part# 19197) holds the o-ring in place that seats against the mineral tank. Product Features Tank...

Slip ring for Fleck 2510 control valve (Fleck part# 19197). The slip ring holds the o-ring in place that seats against the mineral tank. If these are cracked or broken, water will leak out from the broken area. Product Features Slip Ring Slip...

Clamp ring assembly for Fleck 2510 control valve (Fleck part# 60503). Includes both clamp arms (Fleck parts# 19899 & 19900), hinge pin (Fleck part# 40000), pivot (Fleck part# 19998), and the screw & comb hardware (Fleck part# 40057). Product Features...

Base seal (Fleck part# 19936) that goes between the control head valve body and the adapter base, which are held together by the clamp ring. Product Features Base Seal Replacement seal that goes between the control head valve body and the...

5 Micron Standard 10" Carbon Block Filter (replaces CAB105) Product Features 5µ Carbon Block Solid carbon for removal of chlorine, tastes, odors, and chemicals Replaces CAB105 Identical product, updated part number Standard...

White FinishNon Air GapQuarter-Turn HandleCermaic Disc1/4-inch Compression Water InletLong Reach SpoutRequires 7/16-1/2 inch mounting hole Non Air Gap Single line connection for non air gap installation. Does NOT include...