Description
- High capacity resin for low cost softening
- Choice of tank color and connection size
- Complete system with Fleck 5600SXT Digital Metered Valve, bypass, brine tank, and installation instructions
- Two and a half cubic foot system for larger homes or higher hardness, max capacity 80,000 grains (80k)
- Included booklet covers setup, installation and programming, with images and access to videos so most people can install the system on their own
- Service flow: 11 GPM
- Peak flow: 16 GPM
- Flow required for backwash: 4.5 GPM
High quality, whole home water softener designed by AFWFilters. Includes installation and programming instructions written by a WQA certified Water Quality specialist to ensure you get the best results. Meter based on-demand regeneration with the Fleck 5600SXT offers efficient regeneration based on your water use. Complete with brine tank and choice of connection. Standard plastic connection is low cost with two part bypass and yoke. Upgrade to stainless steel for a single piece bypass for tighter spaces. Match the size to your plumbing for simpler installation.
Main resin tank is approximately 13" x 54" (approximately 62" overall height with control head). Brine tank is approximately 18" in diameter by 33" tall, both tanks will be in the selected color. System comes with 2.5 cubic feet of resin capable of removing a maximum of 80,000 grains (80k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry).
2 Reviews
-
2.5 CUBIC FOOT (80K) ON DEMAND WHOLE HOME WATER SOFTENER WITH HIGH CAPACITY RESIN
I'm very happy with the softener. It's been doing its job well for about 3 weeks now. It is quiet. I ordered it and it came very quickly. I also order steel flex line. They were shipped separately and arrive about a week later. I did a lot of planning and asked questions using the chat feature. They were always willing to help, though I was a little surprised they could not answer specific questions about my particular model. The softener was missing a label for the "brine line flow" They could not tell me what the value was. With their help I was able to measure it during installation to properly set up the softener. I installed the softener myself. The two flex lines I purchased were too short and I returned them. They cost $36 , I spent $10 to send them back. AWF filters deducted the cost of the original shipping another $10, so I got about $16 back. Just beware. Overall I would use them again. Ask me again in 10 years.
-
80k whole home water softener
Great product so far. Easy to set up and get going. I sized the softener for a family of 5. I have a four bedroom thee bath home. But, I'm here by myself... way oversized for just little ol' me. I'll make do and the next owner will be happy.
