Description
- Fine mesh resin for softening and low level iron removal (up to 6ppm)
- Dual alternating tanks for 24/7 availability and maximum efficiency
- Choice of tank color and connection size
- Complete system with electromechanical Fleck 9100 Metered Valve, bypass, brine tank, and installation instructions
- Two cubic foot per tank (four cubic foot total) for large homes with high hardness, max capacity 64,000 grains (64k) per tank
- Included booklet covers installation and setup, with images and access to videos so most people can install the system on their own
- Service flow: 10 GPM
- Peak flow: 15 GPM
- Flow required for backwash: 4 GPM
High efficiency dual tank alternating Iron Pro water softener designed by AFWFilters. Includes installation instructions written by a WQA certified Water Quality specialist to ensure you get the best results. Dual alternating tanks with meter based on-demand regeneration with the Fleck 9100 provides soft water 24/7 and minimizes efficiency loss of single tank systems. Basic mechanical controller provides simple setup. Complete with brine tank and choice of connection. Standard plastic connection is low cost with two part bypass and yoke. Upgrade to stainless steel for a single piece bypass for tighter spaces. Match the size to your plumbing for simpler installation.
Main resin tanks are approximately 12" x 52" (approximately 60" overall height with control head). Brine tank is round and approximately 18" in diameter by 33" tall, all tanks will be in the selected color. Capable of removing up to 6 ppm of ferrous iron without additional systems required. If ferric iron or higher levels of iron are present a separate iron filter is recommended. System comes with 2 cubic foot of resin per tank, capable of removing a maximum of 64,000 grains (64k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry).
