150k Commercial High Flow Metered Water Softener with Fleck 2850 On-Demand
18-inchx65-inch resin tank
Riser tube with distributor basket
5 cubic feet high capacity resin
High Flow Fleck 2850 Commercial Meter Control Head
Commercial 24"x50" Round Brine Tank with Safety Float
On-demand regeneration for efficiency
Contains 5 cubic feet of high capacity resin capable of removing up to 150,000 grains of hardness between regeneration cycles
Treats a minimum flow of 25 gallons per minute and a maximum flow rate of 53 gallons per minute
Ion exchange process physically removes the ions that cause hard water
Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes
Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing.
Commercial control valve with 1.5" brass valve
Durable, high quality polyglass tank made by a trusted name in tank manufacturing
High quality ion-exchange resin in the heart of the water softener
Used for holding salt used during the regeneration process. Measure approximately 24"x50" and holds approximately 700 lb of salt
Simple system connections and included service manual for simple installation.
Hard water causes a multitude of problems. Scale build-up restricts pipes, builds up on fixtures, and can degrade appliances. Hard water spots are also common on dishes and many other surfaces. The ions that comprise hard water attract soap molecules, requiring more soap to get the job done. This also causes an increase in soap scum and can prevent the removal of dirt and bacteria when bathing. Hard water has also been know to cause hair and skin to be brittle and dry.
Water softeners use an ion-exchange process to remove the ions that create hard water, eliminating hard water and the problems associated with it. Automatic regeneration initiated by a high quality Fleck metered head means high efficiency, consistent water treatment, and low maintenance. Soft water will extend the life of your appliances, decrease soap requirements, and decrease the occurrence of soap scum. Softer hair and skin are also common when using water that has been softened.
Controlled by the commercial Fleck 2850 and boasting a 1.5" brass valve, this system is designed for very large homes or commercial applications. On demand regeneration provides a system that measures water use and regenerates only when necessary.
The durable polyglass resin tank is manufactured by Structural USA and is backed by a 5 year warranty. NOTE: Tank color may vary from the one shown
This system comes complete with a brine tank that includes a float assembly for added reliability and peace of mind. The commercial round tank is capable of holding up to 700 lb of salt for minimal salt replenishment. NOTE: Color and design may vary from the system pictured