Components

1/4-inch threaded fitting screws into filter housings and any other 1/4-inch female NPT openings, including inline filters. Quick connect enables quick and easy connection to standard 1/4-inch tubing. Product Features 1/4" Male Thread Fits threaded port...

1/4-inch threaded elbow fitting screws into filter housings and any other 1/4-inch female NPTopenings, including inline filters. Elbow fittings allow for tighter connections while quick connect enables quick and easy connection to standard 1/4-inch...

Inline check valve prevents water from flowing back through the water line. It is used on reverse osmosis systems to prevent backflow through the membrane. When the check valve malfunctions, it can allow the tank to empty back through the membrane and...

Spin-Down filter with 1" connections for sand and sediment separation. Product Features 1-inch 1-inch slip connections for easy installation 1-25 GPM Will treat flow rates between 1 and 25 gallons per minute Drain Port Drain port...

Replacement O-ring for standard sized (2.5x10) filter housings to replace cracked or torn o-rings that would allow water to leak

Replacement filter housing for standard 10" filters Product Features White Housing Blocks UV rays 1/4" Threaded In/Out Standard size accommodates a wide variety of fittings Mounting Holes Allows for easy connection to standard mounting...

The 1/4-inch nylon hex nipple has male NPT connections on both ends and is made of durable nylon that works with PVC, CPVC, PEX, copper, brass, and any other place 1/4-inch plumbing is used. These are commonly used between filter housings on drinking...

Overflow Fitting With Nut attaches to the side of the brine tank. This fitting allows you to attach a drain hose (1/2" ID) to a floor drain to divert the water should the salt tank start to over fill.

1/2-inch male thread 1/2-inch barbed Common drain fitting for Fleck Straight barbed fitting uses standard 1/2-inch male threads and has a barbed connection for 1/2-inch inner diameter tubing. Commonly used on Fleck control heads for the drain...

The Pentek 20" Big Blue HFPP 1" Filter Housing (150233) features 1" NPT ports and a pressure release button. The Pentek housing is ideal for residential, commercial, and industrial filtration where high-flow rates are required. The red pressure-relief...

2310 Brine Valve Assembly - Includes Fleck 2310 Brine Valve, Float, and Fleck 500 Air Check. 2310 Brine Ready to connect to 3/8" Poly Brine Line. For use in 28" Brine Wells for 11" x 38", 15" x 17" x 36" and 18" x 33" Brine Tanks. **If you need to...

1/4-inch stem elbow fitting pushes into any 1/4-inch female quick connect fitting, which are common on filter housings, membrane housings, auto shutoff valves, booster pumps, permeate pumps, inline filters, and more. Elbow fittings allow for tighter...

Replacement membrane housing for standard sized reverse osmosis membranes. Includes two 1/8-inch male thread by 1/4-inch female quick-connect elbows AND a 1/8-inch male thread by 1/4-inch female quick-connect check valve elbow. Product Features ...

Kit to connect your drinking water system to a refrigerator ice maker/water dispenser Product Features 25 ft tubing 1/4" LLDPE tubing for connecting from filter system to refrigerator Tee Fitting 1/4" 3-way tee fitting for splitting the product line...

1/4-inch threaded elbow fitting screws into filter housings and any other 1/4-inch female NPTopenings, including inline filters. Elbow fittings allow for tighter connections while quick connect enables quick and easy connection to standard 1/4-inch...