Description
- Fine mesh resin for softening and low level iron removal (up to 6ppm)
- KDF85 Media- Designed to remove hydrogen sulfide (rotten egg odor), chlorine, and a wide range of heavy metals, chlorine
- Choice of tank color and connection size
- Complete system with Fleck 5600SXT Digital Metered Valve, bypass, brine tank, and installation instructions
- Two and a half cubic foot system for larger homes or higher hardness, max capacity 80,000 grains (80k)
- Included booklet covers setup, installation and programming, with images and access to videos so most people can install the system on their own
- Service flow: 18 GPM
- Flow required for backwash: 5 GPM
High quality, whole home water softener designed by AFWFilters. Includes installation and programming instructions written by a WQA certified Water Quality specialist to ensure you get the best results. Meter based on-demand regeneration with the Fleck 5600SXT offers efficient regeneration based on your water use. Complete with brine tank and choice of connection. Standard plastic connection is low cost with two part bypass and yoke. Upgrade to stainless steel for a single piece bypass for tighter spaces. Match the size to your plumbing for simpler installation.
Main resin tank by Pentair is approximately 13" x 54" (approximately 62" overall height with control head). Brine tank is approximately 18" in diameter by 33" tall, both tanks will be in the selected color. Capable of removing up to 6 ppm of ferrous iron without additional systems required. If ferric iron or higher levels of iron are present a separate iron filter is recommended. System comes with 2.5 cubic feet of resin capable of removing a maximum of 80,000 grains (80k) of hardness between regenerations (actual capacity dependent on system settings and water chemistry). System also has 10lbs of KDF 85 that assists with iron removal.
Flow meter measures water and regenerates based on water use, not time, conserving salt and water
Contains 2.5 cubic feet of fine resin capable of removing up to 80,000 grains of compensated hardness (hardness factoring in iron and manganese) between regeneration cycles
Designed to remove hydrogen sulfide (rotten egg odor), chlorine, and a wide range of heavy metals, chlorine
Specifically designed for treatment of both ferrous (red water) and ferric (clear water) iron, up to a maximum of 8 ppm
Treats a maximum flow rate of 18 gallons per minute
Ion exchange process physically removes the ions that cause hard water
Specially designed resin traps iron and manganense as well as the hardness
KDF85 treats low levels of hydrogen sulfide, the cause of rotten egg odor in water
Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes
Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing.
Maximum efficiency with simple LCD display and touchpad controls for user friendly control
Durable, high quality polyglass tank made by a trusted name in tank manufacturing
Used for holding salt used during the regeneration process. Measures approximately 18-inchx33-inch and holds approximately 300 lbs of salt
Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours.
Experience softer water, lower salt usage, and dependable performance with our premium water softening system featuring the advanced 5600SXT control valve.
Designed for maximum efficiency, the 5600SXT helps significantly reduce salt consumption while delivering consistent, reliable soft water throughout your home. Built to last, the system includes a 5-year warranty on the control head and a 10-year warranty on the mineral tank for added peace of mind.
Inside every unit is upgraded 10% crosslink resin, engineered with stronger resin beads that resist chlorine damage and provide a longer service life than standard resin. The result is a durable, high-performance softener designed to handle demanding water conditions.
Customize your installation with your choice of bypass valve. For the easiest operation and enhanced durability, upgrade to the stainless steel bypass with its convenient single-handle design. Simply select the valve size that matches your plumbing for a smooth installation process.
For even better brine tank performance, add the optional salt grid. By creating a space beneath the salt bed, the grid promotes better water circulation, helps reduce buildup, and supports efficient system operation over time.
Installation is straightforward and homeowner-friendly. Most DIY installers can complete the job in just a few hours when water lines are easily accessible. Detailed instructions, helpful videos, and dedicated customer support are available to guide you every step of the way.
Need something unique? We can customize your system to meet your specific requirements. Contact us through our website to discuss available options and upgrades.
While a pre-filter is not required, adding one can help protect your water softener and extend its lifespan. For complete water quality improvement throughout your home, consider our popular whole-house filtration system. Search for part number CF2-4520-SDCB to learn more and add it to your order.
Upgrade your home's water quality today with a water softening system built for efficiency, durability, and long-term value.
